Polymaker filament
Cheapest Polymaker PLA+ filament in the UK
4 Polymaker PLA+ filaments in stock on Amazon UK, Eryone UK and SUNLU UK, cheapest per kilogram first.
- in stock
- 4
- cheapest
- £23.31/kg
- colours
- 3
Live prices
Prices checked 2 Nov, 02:01 – 3 Nov, 03:32 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About Polymaker PLA+
SpoolDeal tracks 4 Polymaker PLA+ listings on Amazon UK, Eryone UK and SUNLU UK, 4 of them in stock right now, from £23.31 per kilogram; the typical price is £40.30/kg. In stock in 3 colours, including Beige and skin tones, Red, Orange.
PLA+ basics: PLA is the easiest 3D printing filament to run: it prints cool, barely warps, and works on any open-frame printer. As a starting point, print PLA+ at 205–230°C with the bed at 45–60°C; it doesn't need an enclosure. The temperature range printed on the reel always wins: it varies between brands and between colours of the same brand.
PLA+ at a glance
- Nozzle
- 205–230°C
- Bed
- 45–60°C
- Enclosure
- Not needed
- Drying
- 50°C for 8 h
- Absorbs moisture
- Low
- Holds its shape to
- about 54°C
- Ease of printing
- 5 out of 5
- Strength
- 4 out of 5
- Flexibility
- 1 out of 5
- UV resistance
- 2 out of 5
Typical values from manufacturers' data sheets. The range printed on the reel always wins.
Common questions
What is the cheapest Polymaker PLA+ filament?
Right now it is PolyMaker PLA PRO 1.75mm Army Beige, Tough & High Rigidity 3D Printing Filament - 1kg at £23.31 (£23.31 per kg) on Amazon UK (as of 4 Nov 2026). Prices are re-checked through the day and this page lists the cheapest per kilogram first.
Is Polymaker PLA+ cheaper than other brands?
Not usually: in stock today it typically costs £40.30 per kg, 210% above the typical PLA+ price of £13.00 per kg across the 453 PLA+ listings we track (as of 4 Nov 2026).
Which colours of Polymaker PLA+ are in stock?
In stock on Amazon UK, Eryone UK and SUNLU UK right now: Beige and skin tones, Red, Orange.
What temperature should I print PLA+ at?
As a starting point, print PLA+ at 205–230°C with the bed at 45–60°C; it doesn't need an enclosure. Always check the range printed on the reel, as it varies between brands and colours.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK, Eryone UK and SUNLU UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More Polymaker filament
PLA+ from other brands
Get new Polymaker PLA+ deals by email
When something here drops below its usual price, by our own price history, we'll email you. One email a day at most, and every one has a one-click unsubscribe.