Printer guide
Best filament for the LulzBot SideKick 747 Standard 1.75mm
What the LulzBot SideKick 747 Standard 1.75mm can print, what needs an upgrade, and the cheapest in-stock reels of each material on Amazon UK and Eryone UK.
- materials out of the box
- 3 of 11
- max hotend
- 290°C
- max bed
- 110°C
- build volume (mm)
- 232×232×248
Own the LulzBot SideKick 747 Standard 1.75mm?
Save it to a free account and every product page will say whether a reel prints on it as it comes.
What the LulzBot SideKick 747 Standard 1.75mm can print
| PLA | Prints out of the box | 190-230°C | 35-60°C | Rarely needed |
|---|---|---|---|---|
| PLA Glow | Needs a hardened nozzle | 210-240°C | 35-60°C | Rarely needed |
| PLA-CF | Needs a hardened nozzle | 210-240°C | 35-60°C | Rarely needed |
| PETG | Prints out of the box | 230-260°C | 65-85°C | 65°C, 6 h |
| PETG-CF | Needs a hardened nozzle | 240-270°C | 65-85°C | 65°C, 6 h |
| ABS | Needs an enclosure | 240-270°C | 90-110°C | Rarely needed |
| ABS-CF | Needs an enclosure | 250-280°C | 90-110°C | Rarely needed |
| ASA | Needs an enclosure | 240-270°C | 90-110°C | Rarely needed |
| Nylon | Needs an enclosure | 240-270°C | 40-90°C | 80°C, 10 h |
| TPU | Prints, but not through the multi-material unit | 210-240°C | 30-50°C | 70°C, 8 h |
| PC | Needs an enclosure | 250-270°C | 90-105°C | 80°C, 8 h |
Temperatures are typical starting points from manufacturers' data sheets; the range on the reel always wins.
Price drops that print on the LulzBot SideKick 747 Standard 1.75mm
Below their usual price over the last 90 days, from our own price history, besides the cheapest reels listed below.
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 6 Oct, 03:00–09:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 6 Oct, 01:20–13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest TPU for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA+ for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 6 Oct, 09:20–11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Matte for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 6 Oct, 05:20–11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Silk for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 5 Oct, 03:00 – 6 Oct, 11:15 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG Translucent for the LulzBot SideKick 747 Standard 1.75mm
Prices checked 5 Oct, 03:01 – 6 Oct, 11:14 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
With a hardened nozzle fitted
Prices checked 5 Oct, 03:01 – 6 Oct, 13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Filament dryers for TPU
They reach 70°C, the drying temperature it needs.
Prices checked 5 Oct, 03:00 – 6 Oct, 03:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Choosing filament for the LulzBot SideKick 747 Standard 1.75mm
The LulzBot SideKick 747 Standard 1.75mm has hotend up to 290°C, bed up to 110°C, an open frame, a brass nozzle as standard and Single material support. That decides which filaments it prints well as it comes, and which need an upgrade first.
Out of the box it handles PLA, PETG and TPU. The lists below are the cheapest of each in stock on Amazon UK and Eryone UK right now, sorted by price per kilogram and filtered to the right diameter.
ABS, ABS-CF, ASA, Nylon and PC warp and split in a draught, so on an open-frame printer like the LulzBot SideKick 747 Standard 1.75mm they need an enclosure.
PLA Glow, PLA-CF, PETG-CF and ABS-CF are abrasive and wear out the brass nozzle the LulzBot SideKick 747 Standard 1.75mm comes with; fit a hardened steel nozzle first.
An enclosure or a draught-free room helps with larger PETG prints.
An enclosure or a draught-free room helps with larger PETG-CF prints.
Temperatures are typical starting points from manufacturers' data sheets. The range printed on the reel always wins, because it varies between brands and colours.
Common questions
What is the best filament for the LulzBot SideKick 747 Standard 1.75mm?
PLA for most prints: it prints on the LulzBot SideKick 747 Standard 1.75mm as it comes, barely warps and is the cheapest to buy (the cheapest reel in stock on Amazon UK and Eryone UK is £7.12/kg right now). For parts that need more strength, heat resistance or flex, it also prints PETG and TPU without upgrades.
Can the LulzBot SideKick 747 Standard 1.75mm print ABS?
Not as it comes. ABS warps and splits in a draught; the LulzBot SideKick 747 Standard 1.75mm is an open-frame printer, so it needs an enclosure.
Can the LulzBot SideKick 747 Standard 1.75mm print ASA?
Not as it comes. ASA warps and splits in a draught; the LulzBot SideKick 747 Standard 1.75mm is an open-frame printer, so it needs an enclosure.
Can the LulzBot SideKick 747 Standard 1.75mm print PETG?
Yes. PETG prints on the LulzBot SideKick 747 Standard 1.75mm as it comes: set the nozzle to 230-260°C and the bed to 65-85°C. An enclosure or a draught-free room helps with larger PETG prints.
Can the LulzBot SideKick 747 Standard 1.75mm print TPU?
Yes. TPU prints on the LulzBot SideKick 747 Standard 1.75mm as it comes: set the nozzle to 210-240°C and the bed to 30-50°C. Flexible filament jams in the Single material; feed it from the external spool holder instead.
Can the LulzBot SideKick 747 Standard 1.75mm print Nylon?
Not as it comes. Nylon warps and splits in a draught; the LulzBot SideKick 747 Standard 1.75mm is an open-frame printer, so it needs an enclosure.
Can the LulzBot SideKick 747 Standard 1.75mm print PC?
Not as it comes. PC warps and splits in a draught; the LulzBot SideKick 747 Standard 1.75mm is an open-frame printer, so it needs an enclosure.
Can the LulzBot SideKick 747 Standard 1.75mm print carbon fibre filament?
Only after fitting a hardened steel nozzle. Carbon fibre, glass fibre and glow-in-the-dark filaments quickly wear out the brass nozzle it comes with.
Do I need a filament dryer for the LulzBot SideKick 747 Standard 1.75mm?
Not for PLA, but TPU soaks up moisture from the air and print stringy and weak when wet. A dryer that reaches 70°C covers it; the drying chart has the time for each.
How big can the LulzBot SideKick 747 Standard 1.75mm print?
Up to 232 × 232 × 248 mm. For a big print, check the slicer's filament estimate against what is left on the reel before you start.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Filament for the LulzBot SideKick 747 Standard 1.75mm
Similar printers
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.