Printer guide
Best filament for the Prusa Research CORE One L+
What the Prusa Research CORE One L+ can print, what needs an upgrade, and the cheapest in-stock reels of each material on Amazon UK and Eryone UK.
- materials out of the box
- 7 of 11
- max hotend
- 290°C
- max bed
- 120°C
- build volume (mm)
- 300×300×330
Own the Prusa Research CORE One L+?
Save it to a free account and every product page will say whether a reel prints on it as it comes.
What the Prusa Research CORE One L+ can print
| PLA | Prints out of the box | 190-230°C | 35-60°C | Rarely needed |
|---|---|---|---|---|
| PLA Glow | Needs a hardened nozzle | 210-240°C | 35-60°C | Rarely needed |
| PLA-CF | Needs a hardened nozzle | 210-240°C | 35-60°C | Rarely needed |
| PETG | Prints out of the box | 230-260°C | 65-85°C | 65°C, 6 h |
| PETG-CF | Needs a hardened nozzle | 240-270°C | 65-85°C | 65°C, 6 h |
| ABS | Prints out of the box | 240-270°C | 90-110°C | Rarely needed |
| ABS-CF | Needs a hardened nozzle | 250-280°C | 90-110°C | Rarely needed |
| ASA | Prints out of the box | 240-270°C | 90-110°C | Rarely needed |
| Nylon | Prints out of the box | 240-270°C | 40-90°C | 80°C, 10 h |
| TPU | Prints, but not through the multi-material unit | 210-240°C | 30-50°C | 70°C, 8 h |
| PC | Prints out of the box | 250-270°C | 90-105°C | 80°C, 8 h |
Temperatures are typical starting points from manufacturers' data sheets; the range on the reel always wins.
Price drops that print on the Prusa Research CORE One L+
Below their usual price over the last 90 days, from our own price history, besides the cheapest reels listed below.
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA for the Prusa Research CORE One L+
Prices checked 6 Oct, 03:00–09:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG for the Prusa Research CORE One L+
Prices checked 6 Oct, 01:20–13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest ABS for the Prusa Research CORE One L+
Prices checked 5 Oct, 03:00 – 6 Oct, 06:00 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest ASA for the Prusa Research CORE One L+
Prices checked 5 Oct, 03:02 – 6 Oct, 06:00 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest Nylon for the Prusa Research CORE One L+
Prices checked 5 Oct, 03:00 – 6 Oct, 11:15 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest TPU for the Prusa Research CORE One L+
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA+ for the Prusa Research CORE One L+
Prices checked 6 Oct, 09:20–11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Matte for the Prusa Research CORE One L+
Prices checked 6 Oct, 05:20–11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Silk for the Prusa Research CORE One L+
Prices checked 5 Oct, 03:00 – 6 Oct, 11:15 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG Translucent for the Prusa Research CORE One L+
Prices checked 5 Oct, 03:01 – 6 Oct, 11:14 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
With a hardened nozzle fitted
Prices checked 5 Oct, 03:01 – 6 Oct, 13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Choosing filament for the Prusa Research CORE One L+
The Prusa Research CORE One L+ has hotend up to 290°C, bed up to 120°C, a heated enclosure, a brass nozzle as standard and Single material as supplied support. That decides which filaments it prints well as it comes, and which need an upgrade first.
Out of the box it handles PLA, PETG, ABS, ASA, Nylon, TPU and PC. The lists below are the cheapest of each in stock on Amazon UK and Eryone UK right now, sorted by price per kilogram and filtered to the right diameter.
PLA Glow, PLA-CF, PETG-CF and ABS-CF are abrasive and wear out the brass nozzle the Prusa Research CORE One L+ comes with; fit a hardened steel nozzle first.
Temperatures are typical starting points from manufacturers' data sheets. The range printed on the reel always wins, because it varies between brands and colours.
Common questions
What is the best filament for the Prusa Research CORE One L+?
PLA for most prints: it prints on the Prusa Research CORE One L+ as it comes, barely warps and is the cheapest to buy (the cheapest reel in stock on Amazon UK and Eryone UK is £7.12/kg right now). For parts that need more strength, heat resistance or flex, it also prints PETG, ABS, ASA, Nylon, TPU and PC without upgrades.
Can the Prusa Research CORE One L+ print ABS?
Yes. ABS prints on the Prusa Research CORE One L+ as it comes: set the nozzle to 240-270°C and the bed to 90-110°C.
Can the Prusa Research CORE One L+ print ASA?
Yes. ASA prints on the Prusa Research CORE One L+ as it comes: set the nozzle to 240-270°C and the bed to 90-110°C.
Can the Prusa Research CORE One L+ print PETG?
Yes. PETG prints on the Prusa Research CORE One L+ as it comes: set the nozzle to 230-260°C and the bed to 65-85°C.
Can the Prusa Research CORE One L+ print TPU?
Yes. TPU prints on the Prusa Research CORE One L+ as it comes: set the nozzle to 210-240°C and the bed to 30-50°C. Flexible filament jams in the Single material as supplied; feed it from the external spool holder instead.
Can the Prusa Research CORE One L+ print Nylon?
Yes. Nylon prints on the Prusa Research CORE One L+ as it comes: set the nozzle to 240-270°C and the bed to 40-90°C.
Can the Prusa Research CORE One L+ print PC?
Yes. PC prints on the Prusa Research CORE One L+ as it comes: set the nozzle to 250-270°C and the bed to 90-105°C.
Can the Prusa Research CORE One L+ print carbon fibre filament?
Only after fitting a hardened steel nozzle. Carbon fibre, glass fibre and glow-in-the-dark filaments quickly wear out the brass nozzle it comes with.
Do I need a filament dryer for the Prusa Research CORE One L+?
Not for PLA, but Nylon and TPU soak up moisture from the air and print stringy and weak when wet. A dryer that reaches 80°C covers all of them; the drying chart has the time for each.
How big can the Prusa Research CORE One L+ print?
Up to 300 × 300 × 330 mm. For a big print, check the slicer's filament estimate against what is left on the reel before you start.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Filament for the Prusa Research CORE One L+
Similar printers
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.