chitu systems filament
Cheapest chitu systems PLA Glow filament in the UK
3 chitu systems PLA Glow filaments in stock on Amazon UK and Eryone UK, cheapest per kilogram first.
- in stock
- 3
- cheapest
- £14.99/kg
Live prices
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About chitu systems PLA Glow
SpoolDeal tracks 4 chitu systems PLA Glow listings on Amazon UK and Eryone UK, 3 of them in stock right now, from £14.99 per kilogram; the typical price is £23.99/kg.
PLA Glow basics: PLA is the easiest 3D printing filament to run: it prints cool, barely warps, and works on any open-frame printer. As a starting point, print PLA Glow at 210–240°C with the bed at 35–60°C; it doesn't need an enclosure. The temperature range printed on the reel always wins: it varies between brands and between colours of the same brand.
PLA Glow at a glance
- Nozzle
- 210–240°C
- Bed
- 35–60°C
- Enclosure
- Not needed
- Drying
- 50°C for 6 h
- Absorbs moisture
- Low
- Holds its shape to
- about 57°C
- Nozzle wear
- Needs a hardened nozzle
- Ease of printing
- 5 out of 5
- Strength
- 3 out of 5
- Flexibility
- 1 out of 5
- UV resistance
- 2 out of 5
Typical values from manufacturers' data sheets. The range printed on the reel always wins.
Common questions
What is the cheapest chitu systems PLA Glow filament?
Right now it is Conjure PLA Glow Filament 1.75mm, Rainbow Multicolor 3D Printer Filament Glow in The Dark, +/-0.02mm, 2x1KG Bundle (4.4lbs)/Spool, Fit Most FDM 3D Printers, Luminous Glowworm at £29.99 (£14.99 per kg) on Amazon UK (as of 6 Oct 2026). Prices are re-checked through the day and this page lists the cheapest per kilogram first.
Is chitu systems PLA Glow cheaper than other brands?
Not usually: in stock today it typically costs £23.99 per kg, 33% above the typical PLA Glow price of £17.99 per kg across the 46 PLA Glow listings we track (as of 6 Oct 2026).
Which colours of chitu systems PLA Glow are in stock?
In stock on Amazon UK and Eryone UK right now: Multicolour.
What temperature should I print PLA Glow at?
As a starting point, print PLA Glow at 210–240°C with the bed at 35–60°C; it doesn't need an enclosure. Always check the range printed on the reel, as it varies between brands and colours.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More chitu systems filament
PLA Glow from other brands
Get new chitu systems PLA Glow deals by email
When something here drops below its usual price, by our own price history, we'll email you. One email a day at most, and every one has a one-click unsubscribe.