PLA Glow by colour
Cheapest glow in the dark PLA Glow filament in the UK
3 glow in the dark PLA Glow filaments in stock on Amazon UK and Eryone UK, cheapest per kilogram first.
- in stock
- 3
- cheapest
- £15.45/kg
- brands
- 2
Live prices
Prices checked 5 Oct, 03:00 – 6 Oct, 03:00 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About glow in the dark PLA Glow
SpoolDeal tracks 4 glow in the dark PLA Glow listings on Amazon UK and Eryone UK, 3 of them in stock right now, from £15.45 per kilogram; the typical price is £15.45/kg. They come from 2 brands, including JAYO, TECBEARS.
Glow filament contains phosphorescent powder that is abrasive, so a hardened steel nozzle lasts far longer than brass if you print a lot of it.
PLA Glow basics: PLA is the easiest 3D printing filament to run: it prints cool, barely warps, and works on any open-frame printer. As a starting point, print PLA Glow at 210–240°C with the bed at 35–60°C; it doesn't need an enclosure. The temperature range printed on the reel always wins: it varies between brands and between colours of the same brand.
Colour names vary between brands, so check the listing photos before buying if you need to match an existing reel. Every card shows the live price and whether it is in stock, and the list is sorted by price per kilogram.
PLA Glow at a glance
- Nozzle
- 210–240°C
- Bed
- 35–60°C
- Enclosure
- Not needed
- Drying
- 50°C for 6 h
- Absorbs moisture
- Low
- Holds its shape to
- about 57°C
- Nozzle wear
- Needs a hardened nozzle
- Ease of printing
- 5 out of 5
- Strength
- 3 out of 5
- Flexibility
- 1 out of 5
- UV resistance
- 2 out of 5
Typical values from manufacturers' data sheets. The range printed on the reel always wins.
Common questions
What is the cheapest glow in the dark PLA Glow filament in the UK?
Right now it is JAYO PLA Glow 1.1kg - Glow White-to-Blue at £16.99 (£15.45 per kg) on Amazon UK. Prices are re-checked through the day and this page always lists the cheapest per kilogram first.
Which brands make glow in the dark PLA Glow?
In stock on Amazon UK and Eryone UK right now: JAYO, TECBEARS.
What temperature should I print PLA Glow at?
As a starting point, print PLA Glow at 210–240°C with the bed at 35–60°C; it doesn't need an enclosure. Always check the range printed on the reel, as it varies between brands and colours.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Other PLA Glow colours
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.