PLA+ by colour
Cheapest white PLA+ filament in the UK
39 white PLA+ filaments in stock on Amazon UK and Eryone UK, cheapest per kilogram first.
- in stock
- 39
- cheapest
- £8.00/kg
- typical price
- £13.99/kg
- below usual price
- 11
White PLA+ in numbers
- As of 6 Oct 2026, white PLA+ costs about the same as PLA+ overall: a typical listing is £13.99/kg against £13.99/kg.
- Most-discounted brand of white PLA+ right now: ERYONE, whose 7 listings average 39% below their usual 90-day price (7 of them 5% or more), as of 6 Oct 2026.
- Over the last 90 days, white PLA+ listings sold for between £6.99/kg and £27.23/kg, and a typical listing's price moved 24% between its low and its high (as of 6 Oct 2026).
- As of 6 Oct 2026, 39 of the 45 white PLA+ listings we track (87%) are in stock.
From our own price history. See how every material compares in the UK filament price index.
Live prices
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About white PLA+
SpoolDeal tracks 45 white PLA+ listings on Amazon UK and Eryone UK, 39 of them in stock right now, from £8.00 per kilogram; the typical price is £13.99/kg. They come from 12 brands, including Deeplee, ERYONE, ANYCUBIC, SUNLU, NEOTRY.
White shows fine detail and takes paint and primer well, but it also shows every layer line and blob, so tune retraction first.
PLA+ basics: PLA is the easiest 3D printing filament to run: it prints cool, barely warps, and works on any open-frame printer. As a starting point, print PLA+ at 205–230°C with the bed at 45–60°C; it doesn't need an enclosure. The temperature range printed on the reel always wins: it varies between brands and between colours of the same brand.
Colour names vary between brands, so check the listing photos before buying if you need to match an existing reel. Every card shows the live price and whether it is in stock, and the list is sorted by price per kilogram.
PLA+ at a glance
- Nozzle
- 205–230°C
- Bed
- 45–60°C
- Enclosure
- Not needed
- Drying
- 50°C for 8 h
- Absorbs moisture
- Low
- Holds its shape to
- about 54°C
- Ease of printing
- 5 out of 5
- Strength
- 4 out of 5
- Flexibility
- 1 out of 5
- UV resistance
- 2 out of 5
Typical values from manufacturers' data sheets. The range printed on the reel always wins.
Common questions
What is the cheapest white PLA+ filament in the UK?
Right now it is DEEPLEE PLA PRO Filament 1.75mm White 4kg at £31.99 (£8.00 per kg) on Amazon UK. Prices are re-checked through the day and this page always lists the cheapest per kilogram first.
Which brands make white PLA+?
In stock on Amazon UK and Eryone UK right now: Deeplee, ERYONE, ANYCUBIC, SUNLU, NEOTRY, Kingroon, JAYO, eSUN, ELEGOO, FLASHFORGE, OVERTURE, GratKit.
What temperature should I print PLA+ at?
As a starting point, print PLA+ at 205–230°C with the bed at 45–60°C; it doesn't need an enclosure. Always check the range printed on the reel, as it varies between brands and colours.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Other PLA+ colours
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.