Printer comparison
Bambu Lab A1 Mini vs Creality Ender 3 V3 SE
Side by side from each model's checked specs, with today's prices and what each prints as it comes.
Bambu Lab A1 Mini vs Creality Ender 3 V3 SE
| Property | Bambu Lab A1 Mini | Creality Ender 3 V3 SE |
|---|---|---|
| Price | £157.00 | £149.00 |
| Good for | 4-colour prints | PLA, PETG and TPU |
| Prints as it comes | 3 of 11 materials | 3 of 11 materials |
| Enclosure | Open frame | Open frame |
| Build volume | 180 × 180 × 180 mm | 220 × 220 × 250 mm |
| Multi-colour | AMS lite, up to 4 colours | Single colour |
| Stock nozzle | Stainless steel | Brass |
| Hotend up to | 300°C | 260°C |
| Bed up to | 80°C | 100°C |
| Extruder | Direct drive | Direct drive |
| PLA | Prints out of the box | Prints out of the box |
| PLA Glow | Needs a hardened nozzle | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| PETG | Prints out of the box | Prints out of the box |
| PETG-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| ABS | Not supported | Needs an enclosure |
| ABS-CF | Not supported | Needs an enclosure |
| ASA | Not supported | Needs an enclosure |
| Nylon | Needs an enclosure | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit | Prints out of the box |
| PC | Not supported | Needs an enclosure |
| Filament guide | What the Bambu Lab A1 Mini prints | What the Creality Ender 3 V3 SE prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Buy them
Prices checked 6 Oct, 01:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
How to compare 3D printers
Start with what you want to print: the materials rows say which each printer handles as it comes, and which need a hardened nozzle or an enclosure first.
Then decide on colours (a multi-colour unit, in the box with a combo or bought later) and size: the build volume is the biggest single part it can print.
Common questions
Which is cheaper, the Bambu Lab A1 Mini or the Creality Ender 3 V3 SE?
As of 6 Oct 2026, the Creality Ender 3 V3 SE at £149.00 on Amazon UK and Eryone UK, against £157.00 for the Bambu Lab A1 Mini.
Which prints more materials as it comes?
Both print 3 of the 11 materials in our material table as they come.
Which has the bigger build volume?
The Creality Ender 3 V3 SE: 220 × 220 × 250 mm, against 180 × 180 × 180 mm for the Bambu Lab A1 Mini.
Which prints in more than one colour?
The Bambu Lab A1 Mini, with the AMS lite; the Creality Ender 3 V3 SE prints one colour at a time.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.