3D printer
Bambu Lab A1 Mini
From £157.00 on Amazon UK and Eryone UK as of 6 Oct 2026.
- cheapest today
- £157.00
- listing in stock
- 1
- materials it prints as it comes
- 3/11
- members own one
- 3
Buy the Bambu Lab A1 Mini
3 SpoolDeal members own oneGood for 4-colour prints.
"Usual" is what it has cost over the last 90 days, from our own price checks.
What it costs to run
About 1p an hour in electricity and 4p in wear: £14.00 a year, before filament.
From its typical power draw (50 W) and expected lifespan (5,000 hours). Change the rate to your tariff's. Cost a print
Not in a hurry?
We'll email you when the Bambu Lab A1 Mini drops to your price.
Sign in to set a price alertCompare it with
Side by side- FlashForge AD5XGood for 4-colour printsfrom £299.00Compare
- Prusa Research Original Prusa MK4SGood for multi-colour printsfrom £749.00Compare
- Prusa Research Original Prusa Mini+Good for PLA, PETG and TPUfrom £459.00Compare
Bambu Lab A1 Mini
| Property | Bambu Lab A1 Mini |
|---|---|
| Price | £157.00 |
| Good for | 4-colour prints |
| Prints as it comes | 3 of 11 materials |
| Enclosure | Open frame |
| Build volume | 180 × 180 × 180 mm |
| Multi-colour | AMS lite, up to 4 colours |
| Stock nozzle | Stainless steel |
| Hotend up to | 300°C |
| Bed up to | 80°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Not supported |
| ABS-CF | Not supported |
| ASA | Not supported |
| Nylon | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit |
| PC | Not supported |
| Filament guide | What the Bambu Lab A1 Mini prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Bambu Lab A1 Mini listings
Each listing, on its own and as a combo, checked against its usual 90-day price.
Price checked 6 Oct, 01:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About the Bambu Lab A1 Mini
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Bambu Lab A1 Mini?
As of 6 Oct 2026, the Bambu Lab A1 Mini is £157.00 on Amazon UK and Eryone UK. That's about its usual 90-day price, from our own price checks.
Can the Bambu Lab A1 Mini print in more than one colour?
Yes, with the AMS lite: up to 4 colours.
What filament can the Bambu Lab A1 Mini print?
As it comes, our material table says it prints PLA, PETG and TPU. For Nylon, it needs an enclosure added. For PLA Glow, PLA-CF and PETG-CF, it needs a hardened nozzle. It can't reach the temperatures ABS, ABS-CF, ASA and PC need.
How big is the Bambu Lab A1 Mini's build volume?
180 × 180 × 180 mm, about 5.8 litres.
Is the Bambu Lab A1 Mini enclosed?
No: it's an open frame, so for Nylon it needs an enclosure added.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More on the Bambu Lab A1 Mini
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.