Printer comparison
Creality Ender 3 V3 SE vs Creality SPARKX i7
Side by side from each model's checked specs, with today's prices and what each prints as it comes.
Creality Ender 3 V3 SE vs Creality SPARKX i7
| Property | Creality Ender 3 V3 SE | Creality SPARKX i7 |
|---|---|---|
| Price | £149.00 | £319.00 combo |
| Good for | PLA, PETG and TPU | 4-colour prints, carbon fibre |
| Prints as it comes | 3 of 11 materials | 6 of 11 materials |
| Enclosure | Open frame | Open frame |
| Build volume | 220 × 220 × 250 mm | 260 × 260 × 255 mm |
| Multi-colour | Single colour | CFS lite, up to 4 colours |
| Stock nozzle | Brass | Hardened steel |
| Hotend up to | 260°C | 300°C |
| Bed up to | 100°C | 100°C |
| Extruder | Direct drive | Direct drive |
| PLA | Prints out of the box | Prints out of the box |
| PLA Glow | Needs a hardened nozzle | Prints out of the box |
| PLA-CF | Needs a hardened nozzle | Prints out of the box |
| PETG | Prints out of the box | Prints out of the box |
| PETG-CF | Needs a hardened nozzle | Prints out of the box |
| ABS | Needs an enclosure | Needs an enclosure |
| ABS-CF | Needs an enclosure | Needs an enclosure |
| ASA | Needs an enclosure | Needs an enclosure |
| Nylon | Needs an enclosure | Needs an enclosure |
| TPU | Prints out of the box | Prints, but not through the multi-material unit |
| PC | Needs an enclosure | Needs an enclosure |
| Filament guide | What the Creality Ender 3 V3 SE prints | What the Creality SPARKX i7 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Buy them
Prices checked 5 Oct, 03:00 – 6 Oct, 01:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
How to compare 3D printers
Start with what you want to print: the materials rows say which each printer handles as it comes, and which need a hardened nozzle or an enclosure first.
Then decide on colours (a multi-colour unit, in the box with a combo or bought later) and size: the build volume is the biggest single part it can print.
Common questions
Which is cheaper, the Creality Ender 3 V3 SE or the Creality SPARKX i7?
As of 6 Oct 2026, the Creality Ender 3 V3 SE at £149.00 on Amazon UK and Eryone UK, against £319.00 for the Creality SPARKX i7.
Which prints more materials as it comes?
The Creality SPARKX i7 prints 6 of the 11 materials in our material table as it comes, against 3 for the Creality Ender 3 V3 SE.
Which has the bigger build volume?
The Creality SPARKX i7: 260 × 260 × 255 mm, against 220 × 220 × 250 mm for the Creality Ender 3 V3 SE.
Which prints in more than one colour?
The Creality SPARKX i7, with the CFS lite; the Creality Ender 3 V3 SE prints one colour at a time.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.