Printer comparison
FlashForge AD5X vs FlashForge Creator 5
Side by side from each model's checked specs, with today's prices and what each prints as it comes.
FlashForge AD5X vs FlashForge Creator 5
| Property | FlashForge AD5X | FlashForge Creator 5 |
|---|---|---|
| Price | £299.00 | £588.00 |
| Good for | 4-colour prints | multi-colour prints, carbon fibre |
| Prints as it comes | 3 of 11 materials | 6 of 11 materials |
| Enclosure | Open frame | Open frame |
| Build volume | 220 × 220 × 220 mm | 256 × 256 × 256 mm |
| Multi-colour | IFS, up to 4 colours | Four independent toolheads |
| Stock nozzle | Stainless steel | Hardened steel |
| Hotend up to | 300°C | 320°C |
| Bed up to | 110°C | 120°C |
| Extruder | Direct drive | Direct drive |
| PLA | Prints out of the box | Prints out of the box |
| PLA Glow | Needs a hardened nozzle | Prints out of the box |
| PLA-CF | Needs a hardened nozzle | Prints out of the box |
| PETG | Prints out of the box | Prints out of the box |
| PETG-CF | Needs a hardened nozzle | Prints out of the box |
| ABS | Needs an enclosure | Needs an enclosure |
| ABS-CF | Needs an enclosure | Needs an enclosure |
| ASA | Needs an enclosure | Needs an enclosure |
| Nylon | Needs an enclosure | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit | Prints, but not through the multi-material unit |
| PC | Needs an enclosure | Needs an enclosure |
| Filament guide | What the FlashForge AD5X prints | What the FlashForge Creator 5 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Buy them
Prices checked 5 Oct, 03:00 – 6 Oct, 13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
How to compare 3D printers
Start with what you want to print: the materials rows say which each printer handles as it comes, and which need a hardened nozzle or an enclosure first.
Then decide on colours (a multi-colour unit, in the box with a combo or bought later) and size: the build volume is the biggest single part it can print.
Common questions
Which is cheaper, the FlashForge AD5X or the FlashForge Creator 5?
As of 6 Oct 2026, the FlashForge AD5X at £299.00 on Amazon UK and Eryone UK, against £588.00 for the FlashForge Creator 5.
Which prints more materials as it comes?
The FlashForge Creator 5 prints 6 of the 11 materials in our material table as it comes, against 3 for the FlashForge AD5X.
Which has the bigger build volume?
The FlashForge Creator 5: 256 × 256 × 256 mm, against 220 × 220 × 220 mm for the FlashForge AD5X.
Which prints in more than one colour?
Both take a multi-colour unit: the FlashForge AD5X the IFS, the FlashForge Creator 5 the Four independent toolheads.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.