3D printer
FlashForge AD5X
From £299.00 on Amazon UK and Eryone UK as of 5 Oct 2026.
- cheapest today
- £299.00
- listing in stock
- 1
- materials it prints as it comes
- 3/11
Buy the FlashForge AD5X
Good for 4-colour prints.
"Usual" is what it has cost over the last 90 days, from our own price checks.
Not in a hurry?
We'll email you when the FlashForge AD5X drops to your price.
Sign in to set a price alertCompare it with
Side by side- Prusa Research Original Prusa MK4SGood for multi-colour printsfrom £749.00Compare
- Bambu Lab A1Good for 4-colour printsfrom £219.00Compare
- Bambu Lab A1 MiniGood for 4-colour printsfrom £157.00Compare
FlashForge AD5X
| Property | FlashForge AD5X |
|---|---|
| Price | £299.00 |
| Good for | 4-colour prints |
| Prints as it comes | 3 of 11 materials |
| Enclosure | Open frame |
| Build volume | 220 × 220 × 220 mm |
| Multi-colour | IFS, up to 4 colours |
| Stock nozzle | Stainless steel |
| Hotend up to | 300°C |
| Bed up to | 110°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit |
| PC | Needs an enclosure |
| Filament guide | What the FlashForge AD5X prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
FlashForge AD5X listings
Each listing, on its own and as a combo, checked against its usual 90-day price.
Price checked 5 Oct, 03:00 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About the FlashForge AD5X
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the FlashForge AD5X?
As of 5 Oct 2026, the FlashForge AD5X is £299.00 on Amazon UK and Eryone UK. That's about its usual 90-day price, from our own price checks.
Can the FlashForge AD5X print in more than one colour?
Yes, with the IFS: up to 4 colours.
What filament can the FlashForge AD5X print?
As it comes, our material table says it prints PLA, PETG and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added. For PLA Glow, PLA-CF and PETG-CF, it needs a hardened nozzle.
How big is the FlashForge AD5X's build volume?
220 × 220 × 220 mm, about 10.6 litres.
Is the FlashForge AD5X enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More on the FlashForge AD5X
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.