3D printer
Creality Ender 3 S1 Pro
Not in stock on Amazon UK and Eryone UK right now. Here's what it can do, and similar printers that are in stock.
- materials it prints as it comes
- 3/11
Creality Ender 3 S1 Pro
| Property | Creality Ender 3 S1 Pro |
|---|---|
| Price | Not in stock |
| Good for | PLA, PETG and TPU |
| Prints as it comes | 3 of 11 materials |
| Enclosure | Open frame |
| Build volume | 220 × 220 × 270 mm |
| Multi-colour | Single colour |
| Stock nozzle | Brass |
| Hotend up to | 300°C |
| Bed up to | 110°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints out of the box |
| PC | Needs an enclosure |
| Filament guide | What the Creality Ender 3 S1 Pro prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
About the Creality Ender 3 S1 Pro
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Creality Ender 3 S1 Pro?
It isn't in stock on Amazon UK and Eryone UK right now. Similar printers that are in stock are linked below.
Can the Creality Ender 3 S1 Pro print in more than one colour?
No: it prints one colour at a time, with no multi-colour unit.
What filament can the Creality Ender 3 S1 Pro print?
As it comes, our material table says it prints PLA, PETG and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added. For PLA Glow, PLA-CF and PETG-CF, it needs a hardened nozzle.
How big is the Creality Ender 3 S1 Pro's build volume?
220 × 220 × 270 mm, about 13.1 litres.
Is the Creality Ender 3 S1 Pro enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.