3D printer
Creality K1 SE
Not in stock on Amazon UK and Eryone UK right now. Here's what it can do, and similar printers that are in stock.
- materials it prints as it comes
- 6/11
Creality K1 SE
| Property | Creality K1 SE |
|---|---|
| Price | Not in stock |
| Good for | multi-colour prints, carbon fibre |
| Prints as it comes | 6 of 11 materials |
| Enclosure | Open frame |
| Build volume | 220 × 220 × 250 mm |
| Multi-colour | Single material |
| Stock nozzle | Hardened steel |
| Hotend up to | 300°C |
| Bed up to | 100°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Prints out of the box |
| PLA-CF | Prints out of the box |
| PETG | Prints out of the box |
| PETG-CF | Prints out of the box |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit |
| PC | Needs an enclosure |
| Filament guide | What the Creality K1 SE prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
About the Creality K1 SE
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Creality K1 SE?
It isn't in stock on Amazon UK and Eryone UK right now. Similar printers that are in stock are linked below.
Can the Creality K1 SE print in more than one colour?
Yes, with the Single material.
What filament can the Creality K1 SE print?
As it comes, our material table says it prints PLA, PLA Glow, PLA-CF, PETG, PETG-CF and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added.
How big is the Creality K1 SE's build volume?
220 × 220 × 250 mm, about 12.1 litres.
Is the Creality K1 SE enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.