3D printer
Elegoo Neptune 4
Not in stock on Amazon UK and Eryone UK right now. Here's what it can do, and similar printers that are in stock.
- materials it prints as it comes
- 3/11
Elegoo Neptune 4
| Property | Elegoo Neptune 4 |
|---|---|
| Price | Not in stock |
| Good for | PLA, PETG and TPU |
| Prints as it comes | 3 of 11 materials |
| Enclosure | Open frame |
| Build volume | 225 × 225 × 265 mm |
| Multi-colour | Single colour |
| Stock nozzle | Brass |
| Hotend up to | 300°C |
| Bed up to | 110°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints out of the box |
| PC | Needs an enclosure |
| Filament guide | What the Elegoo Neptune 4 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
About the Elegoo Neptune 4
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Elegoo Neptune 4?
It isn't in stock on Amazon UK and Eryone UK right now. Similar printers that are in stock are linked below.
Can the Elegoo Neptune 4 print in more than one colour?
No: it prints one colour at a time, with no multi-colour unit.
What filament can the Elegoo Neptune 4 print?
As it comes, our material table says it prints PLA, PETG and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added. For PLA Glow, PLA-CF and PETG-CF, it needs a hardened nozzle.
How big is the Elegoo Neptune 4's build volume?
225 × 225 × 265 mm, about 13.4 litres.
Is the Elegoo Neptune 4 enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.