3D printer
Snapmaker U1
Not in stock on Amazon UK and Eryone UK right now. Here's what it can do, and similar printers that are in stock.
- materials it prints as it comes
- 3/11
Snapmaker U1
| Property | Snapmaker U1 |
|---|---|
| Price | Not in stock |
| Good for | 4-colour prints |
| Prints as it comes | 3 of 11 materials |
| Enclosure | Open frame |
| Build volume | 270 × 270 × 270 mm |
| Multi-colour | 4 independent toolheads, up to 4 colours |
| Stock nozzle | Stainless steel |
| Hotend up to | 300°C |
| Bed up to | 100°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit |
| PC | Needs an enclosure |
| Filament guide | What the Snapmaker U1 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
About the Snapmaker U1
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Snapmaker U1?
It isn't in stock on Amazon UK and Eryone UK right now. Similar printers that are in stock are linked below.
Can the Snapmaker U1 print in more than one colour?
Yes, with the 4 independent toolheads: up to 4 colours.
What filament can the Snapmaker U1 print?
As it comes, our material table says it prints PLA, PETG and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added. For PLA Glow, PLA-CF and PETG-CF, it needs a hardened nozzle.
How big is the Snapmaker U1's build volume?
270 × 270 × 270 mm, about 19.7 litres.
Is the Snapmaker U1 enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.