Printer guide
Best filament for the Anycubic Kobra X
What the Anycubic Kobra X can print, what needs an upgrade, and the cheapest in-stock reels of each material on Amazon UK and Eryone UK.
- materials out of the box
- 6 of 11
- max hotend
- 300°C
- max bed
- 100°C
- build volume (mm)
- 260×260×260
Buy the Anycubic Kobra X
Good for 4-colour prints, carbon fibre.
"Usual" is what it has cost over the last 90 days, from our own price checks.
Ready to print for £340.77
- Printer only£279.99
- PLA: JAYO PLA 3D Printing Filament 1.75 mm, 4-Pack 4.4 kg Black£34.19
- PETG: TECBEARS PETG Filament 1.75mm Bundle 4KG, High Strength & Toughness 3D Printer Filament, Good Layer Adhesion PETG, Dimensional Accuracy +/- 0.02mm, 4Pack, 1kg per Spool(Black, White, Blue, Red)£26.59
Today's prices: the printer, the cheapest PLA and PETG that print on it.
What it costs to run
About 2p an hour in electricity and 7p in wear: £23.00 a year, before filament.
From its typical power draw (80 W) and expected lifespan (5,000 hours). Change the rate to your tariff's. Cost a print
Not in a hurry?
We'll email you when the Anycubic Kobra X drops to your price.
Sign in to set a price alertCompare it with
Side by side- Creality SPARKX i7Good for 4-colour prints, carbon fibrefrom £319.00Compare
- FlashForge Creator 5Good for multi-colour prints, carbon fibrefrom £588.00Compare
- Creality K2 SEGood for 16-colour prints, carbon fibrefrom £379.00Compare
Own the Anycubic Kobra X?
Save it to a free account and every product page will say whether a reel prints on it as it comes.
What the Anycubic Kobra X can print
| PLA | Prints out of the box | 190-230°C | 35-60°C | Rarely needed |
|---|---|---|---|---|
| PLA Glow | Prints out of the box | 210-240°C | 35-60°C | Rarely needed |
| PLA-CF | Prints out of the box | 210-240°C | 35-60°C | Rarely needed |
| PETG | Prints out of the box | 230-260°C | 65-85°C | 65°C, 6 h |
| PETG-CF | Prints out of the box | 240-270°C | 65-85°C | 65°C, 6 h |
| ABS | Needs an enclosure | 240-270°C | 90-110°C | Rarely needed |
| ABS-CF | Needs an enclosure | 250-280°C | 90-110°C | Rarely needed |
| ASA | Needs an enclosure | 240-270°C | 90-110°C | Rarely needed |
| Nylon | Needs an enclosure | 240-270°C | 40-90°C | 80°C, 10 h |
| TPU | Prints, but not through the multi-material unit | 210-240°C | 30-50°C | 70°C, 8 h |
| PC | Needs an enclosure | 250-270°C | 90-105°C | 80°C, 8 h |
Temperatures are typical starting points from manufacturers' data sheets; the range on the reel always wins.
Price drops that print on the Anycubic Kobra X
Below their usual price over the last 90 days, from our own price history, besides the cheapest reels listed below.
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA for the Anycubic Kobra X
Prices checked 6 Oct, 03:00–09:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Glow for the Anycubic Kobra X
Prices checked 5 Oct, 03:01 – 6 Oct, 13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA-CF for the Anycubic Kobra X
Prices checked 5 Oct, 03:01 – 6 Oct, 03:00 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG for the Anycubic Kobra X
Prices checked 6 Oct, 01:20–13:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG-CF for the Anycubic Kobra X
Prices checked 5 Oct, 03:00 – 6 Oct, 11:15 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest TPU for the Anycubic Kobra X
Prices checked 5 Oct, 03:00 – 6 Oct, 11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA+ for the Anycubic Kobra X
Prices checked 6 Oct, 09:20–11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Matte for the Anycubic Kobra X
Prices checked 6 Oct, 05:20–11:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PLA Silk for the Anycubic Kobra X
Prices checked 5 Oct, 03:00 – 6 Oct, 11:15 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Cheapest PETG Translucent for the Anycubic Kobra X
Prices checked 5 Oct, 03:01 – 6 Oct, 11:14 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Filament dryers for TPU
They reach 70°C, the drying temperature it needs.
Prices checked 5 Oct, 03:00 – 6 Oct, 03:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
Choosing filament for the Anycubic Kobra X
The Anycubic Kobra X has hotend up to 300°C, bed up to 100°C, an open frame, a hardened steel nozzle as standard and Native 4 colours support. That decides which filaments it prints well as it comes, and which need an upgrade first.
Out of the box it handles PLA, PLA Glow, PLA-CF, PETG, PETG-CF and TPU. The lists below are the cheapest of each in stock on Amazon UK and Eryone UK right now, sorted by price per kilogram and filtered to the right diameter.
ABS, ABS-CF, ASA, Nylon and PC warp and split in a draught, so on an open-frame printer like the Anycubic Kobra X they need an enclosure.
An enclosure or a draught-free room helps with larger PETG prints.
An enclosure or a draught-free room helps with larger PETG-CF prints.
Temperatures are typical starting points from manufacturers' data sheets. The range printed on the reel always wins, because it varies between brands and colours.
Common questions
What is the best filament for the Anycubic Kobra X?
PLA for most prints: it prints on the Anycubic Kobra X as it comes, barely warps and is the cheapest to buy (the cheapest reel in stock on Amazon UK and Eryone UK is £7.12/kg right now). For parts that need more strength, heat resistance or flex, it also prints PETG, PETG-CF and TPU without upgrades.
Can the Anycubic Kobra X print ABS?
Not as it comes. ABS warps and splits in a draught; the Anycubic Kobra X is an open-frame printer, so it needs an enclosure.
Can the Anycubic Kobra X print ASA?
Not as it comes. ASA warps and splits in a draught; the Anycubic Kobra X is an open-frame printer, so it needs an enclosure.
Can the Anycubic Kobra X print PETG?
Yes. PETG prints on the Anycubic Kobra X as it comes: set the nozzle to 230-260°C and the bed to 65-85°C. An enclosure or a draught-free room helps with larger PETG prints.
Can the Anycubic Kobra X print TPU?
Yes. TPU prints on the Anycubic Kobra X as it comes: set the nozzle to 210-240°C and the bed to 30-50°C. Flexible filament jams in the Native 4 colours; feed it from the external spool holder instead.
Can the Anycubic Kobra X print Nylon?
Not as it comes. Nylon warps and splits in a draught; the Anycubic Kobra X is an open-frame printer, so it needs an enclosure.
Can the Anycubic Kobra X print PC?
Not as it comes. PC warps and splits in a draught; the Anycubic Kobra X is an open-frame printer, so it needs an enclosure.
Can the Anycubic Kobra X print carbon fibre filament?
Yes: the Anycubic Kobra X ships with a hardened steel nozzle, so carbon- and glass-filled filaments won't wear it out quickly.
Do I need a filament dryer for the Anycubic Kobra X?
Not for PLA, but TPU soaks up moisture from the air and print stringy and weak when wet. A dryer that reaches 70°C covers it; the drying chart has the time for each.
How big can the Anycubic Kobra X print?
Up to 260 × 260 × 260 mm. For a big print, check the slicer's filament estimate against what is left on the reel before you start.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Filament for the Anycubic Kobra X
Similar printers
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.