3D printer
Anycubic Kobra X
From £279.99 on Amazon UK and Eryone UK as of 5 Oct 2026.
- cheapest today
- £279.99
- listing in stock
- 1
- materials it prints as it comes
- 6/11
Buy the Anycubic Kobra X
Good for 4-colour prints, carbon fibre.
"Usual" is what it has cost over the last 90 days, from our own price checks.
What it costs to run
About 2p an hour in electricity and 7p in wear: £23.00 a year, before filament.
From its typical power draw (80 W) and expected lifespan (5,000 hours). Change the rate to your tariff's. Cost a print
Not in a hurry?
We'll email you when the Anycubic Kobra X drops to your price.
Sign in to set a price alertCompare it with
Side by side- Creality SPARKX i7Good for 4-colour prints, carbon fibrefrom £319.00Compare
- FlashForge Creator 5Good for multi-colour prints, carbon fibrefrom £729.00Compare
- Creality K2 SEGood for 16-colour prints, carbon fibrefrom £379.00Compare
Anycubic Kobra X
| Property | Anycubic Kobra X |
|---|---|
| Price | £279.99 |
| Good for | 4-colour prints, carbon fibre |
| Prints as it comes | 6 of 11 materials |
| Enclosure | Open frame |
| Build volume | 260 × 260 × 260 mm |
| Multi-colour | Native 4 colours, up to 4 colours |
| Stock nozzle | Hardened steel |
| Hotend up to | 300°C |
| Bed up to | 100°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Prints out of the box |
| PLA-CF | Prints out of the box |
| PETG | Prints out of the box |
| PETG-CF | Prints out of the box |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit |
| PC | Needs an enclosure |
| Filament guide | What the Anycubic Kobra X prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Anycubic Kobra X listings
Each listing, on its own and as a combo, checked against its usual 90-day price.
Price checked 5 Oct, 03:04 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About the Anycubic Kobra X
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Anycubic Kobra X?
As of 5 Oct 2026, the Anycubic Kobra X is £279.99 on Amazon UK and Eryone UK. That's about its usual 90-day price, from our own price checks.
Can the Anycubic Kobra X print in more than one colour?
Yes, with the Native 4 colours: up to 4 colours.
What filament can the Anycubic Kobra X print?
As it comes, our material table says it prints PLA, PLA Glow, PLA-CF, PETG, PETG-CF and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added.
How big is the Anycubic Kobra X's build volume?
260 × 260 × 260 mm, about 17.6 litres.
Is the Anycubic Kobra X enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More on the Anycubic Kobra X
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.