3D printer
Bambu Lab A1
From £219.00 on Amazon UK and Eryone UK as of 6 Oct 2026.
- cheapest today
- £219.00
- listings in stock
- 2
- materials it prints as it comes
- 3/11
Buy the Bambu Lab A1
Good for 4-colour prints.
"Usual" is what it has cost over the last 90 days, from our own price checks.
What it costs to run
About 3p an hour in electricity and 6p in wear: £23.00 a year, before filament.
From its typical power draw (100 W) and expected lifespan (5,000 hours). Change the rate to your tariff's. Cost a print
Not in a hurry?
We'll email you when the Bambu Lab A1 drops to your price.
Sign in to set a price alertCompare it with
Side by side- Prusa Research Original Prusa MK4SGood for multi-colour printsfrom £749.00Compare
- FlashForge AD5XGood for 4-colour printsfrom £299.00Compare
- Prusa Research Original Prusa XLGood for multi-colour prints, big printsfrom £2199.00Compare
Bambu Lab A1
| Property | Bambu Lab A1 |
|---|---|
| Price | £219.00 (combo £324.00) |
| Good for | 4-colour prints |
| Prints as it comes | 3 of 11 materials |
| Enclosure | Open frame |
| Build volume | 256 × 256 × 256 mm |
| Multi-colour | AMS lite, up to 4 colours |
| Stock nozzle | Stainless steel |
| Hotend up to | 300°C |
| Bed up to | 100°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Needs an enclosure |
| ABS-CF | Needs an enclosure |
| ASA | Needs an enclosure |
| Nylon | Needs an enclosure |
| TPU | Prints, but not through the multi-material unit |
| PC | Needs an enclosure |
| Filament guide | What the Bambu Lab A1 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Bambu Lab A1 listings
Each listing, on its own and as a combo, checked against its usual 90-day price.
Prices checked 6 Oct, 05:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About the Bambu Lab A1
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Bambu Lab A1?
As of 6 Oct 2026, the Bambu Lab A1 is £219.00 on Amazon UK and Eryone UK, or £324.00 as a combo with the AMS lite in the box. That's about its usual 90-day price, from our own price checks.
Can the Bambu Lab A1 print in more than one colour?
Yes, with the AMS lite: up to 4 colours. As of 6 Oct 2026, the combo with the unit in the box is £324.00.
What filament can the Bambu Lab A1 print?
As it comes, our material table says it prints PLA, PETG and TPU. For ABS, ABS-CF, ASA, Nylon and PC, it needs an enclosure added. For PLA Glow, PLA-CF and PETG-CF, it needs a hardened nozzle.
How big is the Bambu Lab A1's build volume?
256 × 256 × 256 mm, about 16.8 litres.
Is the Bambu Lab A1 enclosed?
No: it's an open frame, so for ABS, ABS-CF, ASA, Nylon and PC it needs an enclosure added.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More on the Bambu Lab A1
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.