Printer comparison
AnkerMake M5 vs Creality Ender 5 S1
Side by side from each model's checked specs, with today's prices and what each prints as it comes.
AnkerMake M5 vs Creality Ender 5 S1
| Property | AnkerMake M5 | Creality Ender 5 S1 |
|---|---|---|
| Price | £948.48 | Not in stock |
| Good for | PLA, PETG and TPU | PLA, PETG and TPU |
| Prints as it comes | 3 of 11 materials | 3 of 11 materials |
| Enclosure | Open frame | Open frame |
| Build volume | 235 × 235 × 250 mm | 220 × 220 × 280 mm |
| Multi-colour | Single colour | Single colour |
| Stock nozzle | Brass | Brass |
| Hotend up to | 260°C | 300°C |
| Bed up to | 100°C | 110°C |
| Extruder | Direct drive | Direct drive |
| PLA | Prints out of the box | Prints out of the box |
| PLA Glow | Needs a hardened nozzle | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| PETG | Prints out of the box | Prints out of the box |
| PETG-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| ABS | Needs an enclosure | Needs an enclosure |
| ABS-CF | Needs an enclosure | Needs an enclosure |
| ASA | Needs an enclosure | Needs an enclosure |
| Nylon | Needs an enclosure | Needs an enclosure |
| TPU | Prints out of the box | Prints out of the box |
| PC | Needs an enclosure | Needs an enclosure |
| Filament guide | What the AnkerMake M5 prints | What the Creality Ender 5 S1 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Buy them
Price checked 6 Oct, 11:15 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
How to compare 3D printers
Start with what you want to print: the materials rows say which each printer handles as it comes, and which need a hardened nozzle or an enclosure first.
Then decide on colours (a multi-colour unit, in the box with a combo or bought later) and size: the build volume is the biggest single part it can print.
Common questions
Which is cheaper, the AnkerMake M5 or the Creality Ender 5 S1?
As of 6 Oct 2026, only the AnkerMake M5 is in stock on Amazon UK and Eryone UK, at £948.48.
Which prints more materials as it comes?
Both print 3 of the 11 materials in our material table as they come.
Which has the bigger build volume?
The AnkerMake M5: 235 × 235 × 250 mm, against 220 × 220 × 280 mm for the Creality Ender 5 S1.
Which prints in more than one colour?
Neither: both print one colour at a time.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.