Printer comparison
Bambu Lab P1S vs Prusa Research Prusa CORE One
Side by side from each model's checked specs, with today's prices and what each prints as it comes.
Bambu Lab P1S vs Prusa Research Prusa CORE One
| Property | Bambu Lab P1S | Prusa Research Prusa CORE One |
|---|---|---|
| Price | £359.00 (combo £474.00) | Not in stock |
| Good for | multi-colour prints, ABS and ASA parts | multi-colour prints, ABS and ASA parts |
| Prints as it comes | 7 of 11 materials | 7 of 11 materials |
| Enclosure | Enclosed | Enclosed |
| Build volume | 256 × 256 × 256 mm | 250 × 220 × 270 mm |
| Multi-colour | AMS | Single material |
| Stock nozzle | Stainless steel | Brass |
| Hotend up to | 300°C | 290°C |
| Bed up to | 100°C | 120°C |
| Extruder | Direct drive | Direct drive |
| PLA | Prints out of the box | Prints out of the box |
| PLA Glow | Needs a hardened nozzle | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| PETG | Prints out of the box | Prints out of the box |
| PETG-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| ABS | Prints out of the box | Prints out of the box |
| ABS-CF | Needs a hardened nozzle | Needs a hardened nozzle |
| ASA | Prints out of the box | Prints out of the box |
| Nylon | Prints out of the box | Prints out of the box |
| TPU | Prints, but not through the multi-material unit | Prints, but not through the multi-material unit |
| PC | Prints out of the box | Prints out of the box |
| Filament guide | What the Bambu Lab P1S prints | What the Prusa Research Prusa CORE One prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Buy them
Prices checked 5 Oct, 03:00 – 6 Oct, 05:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
How to compare 3D printers
Start with what you want to print: the materials rows say which each printer handles as it comes, and which need a hardened nozzle or an enclosure first.
Then decide on colours (a multi-colour unit, in the box with a combo or bought later) and size: the build volume is the biggest single part it can print.
Common questions
Which is cheaper, the Bambu Lab P1S or the Prusa Research Prusa CORE One?
As of 6 Oct 2026, only the Bambu Lab P1S is in stock on Amazon UK and Eryone UK, at £359.00.
Which prints more materials as it comes?
Both print 7 of the 11 materials in our material table as they come.
Which has the bigger build volume?
The Bambu Lab P1S: 256 × 256 × 256 mm, against 250 × 220 × 270 mm for the Prusa Research Prusa CORE One.
Which prints in more than one colour?
Both take a multi-colour unit: the Bambu Lab P1S the AMS, the Prusa Research Prusa CORE One the Single material.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.