3D printer
Bambu Lab P1S
From £359.00 on Amazon UK and Eryone UK as of 6 Oct 2026.
- cheapest today
- £359.00
- listings in stock
- 2
- materials it prints as it comes
- 7/11
Buy the Bambu Lab P1S
Good for multi-colour prints, ABS and ASA parts.
"Usual" is what it has cost over the last 90 days, from our own price checks.
What it costs to run
About 3p an hour in electricity and 5p in wear: £21.00 a year, before filament.
From its typical power draw (120 W) and expected lifespan (10,000 hours). Change the rate to your tariff's. Cost a print
Not in a hurry?
We'll email you when the Bambu Lab P1S drops to your price.
Sign in to set a price alertCompare it with
Side by side- Elegoo Centauri Carbon 2Good for 4-colour prints, ABS and ASA partsfrom £379.00Compare
- Anycubic Kobra S1Good for 8-colour prints, ABS and ASA parts
- Prusa Research Prusa CORE OneGood for multi-colour prints, ABS and ASA parts
Bambu Lab P1S
| Property | Bambu Lab P1S |
|---|---|
| Price | £359.00 (combo £474.00) |
| Good for | multi-colour prints, ABS and ASA parts |
| Prints as it comes | 7 of 11 materials |
| Enclosure | Enclosed |
| Build volume | 256 × 256 × 256 mm |
| Multi-colour | AMS |
| Stock nozzle | Stainless steel |
| Hotend up to | 300°C |
| Bed up to | 100°C |
| Extruder | Direct drive |
| PLA | Prints out of the box |
| PLA Glow | Needs a hardened nozzle |
| PLA-CF | Needs a hardened nozzle |
| PETG | Prints out of the box |
| PETG-CF | Needs a hardened nozzle |
| ABS | Prints out of the box |
| ABS-CF | Needs a hardened nozzle |
| ASA | Prints out of the box |
| Nylon | Prints out of the box |
| TPU | Prints, but not through the multi-material unit |
| PC | Prints out of the box |
| Filament guide | What the Bambu Lab P1S prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Bambu Lab P1S listings
Each listing, on its own and as a combo, checked against its usual 90-day price.
Prices checked 5 Oct, 03:00 – 6 Oct, 05:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
About the Bambu Lab P1S
Its specs come from its verified spec sheet, and what it prints from our material table: the same answers as its filament guide and the printer comparisons.
Prices are checked against our own price history, so a deal only counts when the price is genuinely lower than usual, not just lower than a list price.
Common questions
How much is the Bambu Lab P1S?
As of 6 Oct 2026, the Bambu Lab P1S is £359.00 on Amazon UK and Eryone UK, or £474.00 as a combo with the AMS in the box. That's about its usual 90-day price, from our own price checks.
Can the Bambu Lab P1S print in more than one colour?
Yes, with the AMS. As of 6 Oct 2026, the combo with the unit in the box is £474.00.
What filament can the Bambu Lab P1S print?
As it comes, our material table says it prints PLA, PETG, ABS, ASA, Nylon, TPU and PC. For PLA Glow, PLA-CF, PETG-CF and ABS-CF, it needs a hardened nozzle.
How big is the Bambu Lab P1S's build volume?
256 × 256 × 256 mm, about 16.8 litres.
Is the Bambu Lab P1S enclosed?
Yes: it has an enclosure.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
More on the Bambu Lab P1S
Compare the Bambu Lab P1S
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.