Printer comparison
Elegoo Centauri Carbon vs Anycubic Kobra X vs Creality SPARKX i7
Side by side from each model's checked specs, with today's prices and what each prints as it comes.
Elegoo Centauri Carbon vs Anycubic Kobra X vs Creality SPARKX i7
| Property | Elegoo Centauri Carbon | Anycubic Kobra X | Creality SPARKX i7 |
|---|---|---|---|
| Price | £209.00 | £279.99 | £319.00 combo |
| Good for | ABS and ASA parts, carbon fibre | 4-colour prints, carbon fibre | 4-colour prints, carbon fibre |
| Prints as it comes | 11 of 11 materials | 6 of 11 materials | 6 of 11 materials |
| Enclosure | Enclosed | Open frame | Open frame |
| Build volume | 256 × 256 × 256 mm | 260 × 260 × 260 mm | 260 × 260 × 255 mm |
| Multi-colour | Single colour | Native 4 colours, up to 4 colours | CFS lite, up to 4 colours |
| Stock nozzle | Hardened steel | Hardened steel | Hardened steel |
| Hotend up to | 320°C | 300°C | 300°C |
| Bed up to | 110°C | 100°C | 100°C |
| Extruder | Direct drive | Direct drive | Direct drive |
| PLA | Prints out of the box | Prints out of the box | Prints out of the box |
| PLA Glow | Prints out of the box | Prints out of the box | Prints out of the box |
| PLA-CF | Prints out of the box | Prints out of the box | Prints out of the box |
| PETG | Prints out of the box | Prints out of the box | Prints out of the box |
| PETG-CF | Prints out of the box | Prints out of the box | Prints out of the box |
| ABS | Prints out of the box | Needs an enclosure | Needs an enclosure |
| ABS-CF | Prints out of the box | Needs an enclosure | Needs an enclosure |
| ASA | Prints out of the box | Needs an enclosure | Needs an enclosure |
| Nylon | Prints out of the box | Needs an enclosure | Needs an enclosure |
| TPU | Prints out of the box | Prints, but not through the multi-material unit | Prints, but not through the multi-material unit |
| PC | Prints out of the box | Needs an enclosure | Needs an enclosure |
| Filament guide | What the Elegoo Centauri Carbon prints | What the Anycubic Kobra X prints | What the Creality SPARKX i7 prints |
Specs are each maker's published figures, checked before they're shown; a dash means we haven't checked it yet.
Buy them
Prices checked 5 Oct, 03:00 – 6 Oct, 05:20 (UK time) and may change.We earn a small commission if you buy. Your price stays the same.
How to compare 3D printers
Start with what you want to print: the materials rows say which each printer handles as it comes, and which need a hardened nozzle or an enclosure first.
Then decide on colours (a multi-colour unit, in the box with a combo or bought later) and size: the build volume is the biggest single part it can print.
How SpoolDeal checks prices
The same rules on every page, so a deal badge means the same thing everywhere.
Re-checked through the day
Every tracked listing on Amazon UK and Eryone UK is re-checked through the day, and the most-watched ones every two hours.
Measured against our own history
A deal only counts when the price is below what that reel has actually sold for over the last 90 days, not a seller's “was” price.
An email when it drops
Set a target price on any reel with a free account and we email you when it gets there.
Waiting for a better price?
Open any reel and set the price you want to pay. We check it through the day and email you when it gets there. Free, and you can switch it off any time.